Fusion F300S - Manual (Page 80)

80 F300S/F300SQ Ultraviolet Lamp System
If cleaning reflectors while assembled in the irradiator, drying with compressed air is
NOT recommended because particles or residues can be driven into spaces between
components and into optical sensing elements.
Screen Cleaning
Screens may be cleaned with the same cleaners cited previously, soaking if necessary,
brushing lightly and rinsing well. Take care not to damage the gaskets or the fine
screen wires.
I300M Screen Assembly Removal/Replacement
Figure 19. Reflector Assembly (I300M)
CAUTION: In handling the irradiator or
screen assembly, try to avoid all direct
contact with the screen, as it punctures
easily. Do not apply pressure to the screen.
M3 screen retaining
screws (4) (2 per side)
RF screen
Cooling air holes
Lamp bulb
Cavity
Reflector