Fluke THE HART 1529 - Manual (Page 82)

The system reset does the following:
• Sets the measure period to 1 second.
• Sets channel 1 ON, all others OFF.
• Sets the channel mode to SCAN.
• Sets moving average to 1.
• Sets printing to all ports OFF.
• Stops auto logging.
• Clears the statistical functions.
• Sets units to C.
• Sets the resolution to AUTO.
Reset does not affect any of the probe characterization parameters, logged data
or channel calibration parameters.
1529 Chub-E4 Thermometer Readout
User’s Guide
76