Fluke TRACKERTM 90100 - Manual (Page 18)

Model 90100
Operators Manual
2-6
Figure 2-5. Setup for 90- and 270-Degree Angles (NOTE: Build-up not shown for clarity)
2.4 Operation Instructions
This section contains detailed instructions on the front panel operation of the Model 35360A TRACKER
Display. The 35360A TRACKER Display front panel keys and display are explained. Please note that
the display examples shown here correspond to a particular customization set-up. Other customization
set-ups will produce different results.
2.4.1 Front Panel Controls
Figure 2-6 shows the front panel of the 35360A TRACKER Display. The front panel consists of control
buttons and a display. The following paragraphs describe the operation of each control button and the
corresponding display screens.
Treatment
head
Gantry arm Gantry
Cable to
35360A TRACKER Display
Treatment
table
Model
35300A
Detector
To 35360A
TRACKER Display
Cable
Treatment table
Gantry
90 degrees
270 degrees