GE SG SERIES 20 - Manual (Page 33)

g
GE
OPM_SGS_USM_10K_40K_0US_V010.doc 33/88 Operating Manual SG Series 10, 20, 30 & 40 kVA
3. Telephone numbers
T el1:
T el1 enabled: N
T el2:
T el2 enabled: N m etering
a larm s
p aram e te rs
+
–
ok
Tel1 This parameter specifies a first telephone number to be used for modem
dial-out.
The telephone number has a maximum 39 characters and cannot contain
blanks.
If the desired number is shorter than 39 characters, the string will finish with
blanks.
Tel1 enabled This parameter Y/N specifies if the first telephone number will be used for
dial-out.
Tel2 A
second dial-out number.
Tel2 enabled This
parameter Y/N specifies if the second telephone number will be used
for dial-out.
Tel3 A
third dial-out number.
Tel3 enabled This
parameter Y/N specifies if the third telephone number will be used for
dial-out.
Tel4 A
fourth dial-out number.
Tel4 enabled This
parameter Y/N specifies if the fourth telephone number will be used
for dial-out.
4. LCD
Display
LC D D isplay
UPS N AM E: Signature
C ontrast = 9
Language = EN G LISH
m etering
alarm s
param eters
+
–
ok
UPS Name The user can choose the name of the UPS model shown on the main page
(max. 7 characters).
LCD Contrast
This parameter controls the contrast of the LCD screen in ten steps.
It can be adapted depending on the room lighting.
LCD Language This parameter allows the choice of language used to display the
information.
Valid choices are English, German, Italian, Spanish, French, Finnish,
Tschech, Slovak, Polish and Portuguese.