GE SG SERIES 20 - Manual (Page 83)

g
GE
OPM_SGS_USM_10K_40K_0US_V010.doc 83/88 Operating Manual SG Series 10, 20, 30 & 40 kVA
9 OPTIONS
9.1 BUILT IN UPS OPTIONS
RPA Kit
Redundant Parallel Architecture.
Up to 8 units parallel able for redundancy or capacity in
RPA configuration.
9.2 COMMUNICATION OPTIONS
SNMP Card
Simple Network Management Protocol.
The SNMP Card is an Interface to the Ethernet Network,
and provides UPS information via the standard SNMP
protocol.
The UPS can therefore be managed by a Network
Management System (NMS) or by our applications (for
instance JUMP), which uses this information to
determine the state of the UPS in order to guarantee
safe and orderly shutdown of the server, when needed.
IRIS Service
Internet Remote Information System for UPS System.
ARGUS / Power Flag / JUMP Software
Mute Test
SGT5000_OPT_RMS_01
Stop
Alarm
g
GE Digital Energy
Remote Signaling Box (RSB)
Equipped with mimic diagram, general alarm, stop
operation, alarm reset and lamp.
The cable for connection to UPS not included.
9.3 OPTIONS IN UPS CABINET
5 th harmonic filter
Located inside UPS cabinet.
FCC Filter
Located inside UPS cabinet. Meets FCC Class A, Part
15 Standard for EMI suppression.