Matsushita CF-T5LWETZ1 2 - Manual (Page 29)

29
9.2.14. Removing the Hinge Cover
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.13. first.
1. Remove the 2 screws (R) and then remove the
hinge cover (L, R).
Screw (R) : DRHM0108ZA (N1002)
Hinge Cover (R)
Hinge Cover (L)
Screw (R)
Screw (R)
LCD Unit
Screw (S)
Screw (S)
LCD Unit
Hook Position
HInge (L)
Hinge (R)
LCD Front
LCD Ruber
LCD Rear
LCD Unit
Screw (T) Screw (T)
2. Remove the 2 screws (S).
Screw (S) : DRHM0076ZA (N1001)
9.2.15. Removing the LCD Unit and the
LCD Rear
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.13. to 9.2.14. first.
1. Remove the 2 LCD Ruber and then remove the 2
screws (T).
Screw (T) : DXHM0039ZA (N5)
2. Separate the LCD front and the LCD rear.
3. Remove the hinge (L), (R).
LCD Hook
Inverter Box
Inverter Tape
LCD Cable
LCD High voltage
2pin Wire Rod
LCD Front
Conductive Cloth
(LCD Cable)
9.2.16. Removing the Inverter
Preparation : perform the section 9.2.1., 9.2.2.,
9.2.4. and 9.2.13. to 9.2.15. first.
1. Remove the LCD cable from the inverter.
2. Peel off the conductive cloth (LCD cable) from the
inverter.
3. Peel off the inverter tape from the inverter.
Inverter tape : DFHR3A95ZA (K49)
3. Remove the inverter with inverter box.