Matsushita CF-T5LWETZ1 2 - Manual (Page 34)

34
9.3.2.7. Connecting LCD Cable
wall affixation
Affixation side
LCD DAMPER A
It is affixed along the shape of the MAGNET.
wall affixation wall affixation
The magnet is applied.
LCD DAMPER A
OK NG
CASE
board
Inverter
PET Tape
Connection
LCD Cable
The LCD cable is connected with the inverter.
Wraps around the PET tape connector.
The inverter is inserted in the inverter box and then affixes to rear case.
LCD/inverter cable is connected.
The connector is fixed with the tape of the inverter box.
Safety important parts
Safety Work
Inverter Safety important parts
Connector externals match
Affixation standard
affixes in a connector externals putting (wrapping) together.
The upper surface of the connector
is pressurized and affixes.
Two sided tape
Inverter Box
Inverter Box The board must not float hooking the side.