Matsushita CF-T5LWETZ1 2 - Manual (Page 40)

40
PET Tape
PET Tape
LCD Cable
(Inverter part)
Damper
Conductive Cloth
(LCD Cable)
LCD Cable
The cable must not be processed
on the damper,and give cable room.
FRAME externals are matched.
LCD FRONT wall application affixation.
The line is processed according to the LVDS cable.
LCD insulator is matched to the edge.
Touch panels come most below.
Moreover, the LCD cable comes.
Safety work
Safety work
The line is processed according to the LVDS cable.
The tape is hit to the top of the insulation seat, and it is
matched to a right edge.
PET Tape is put on the touch panel.
PET Tape,and,does not overflow from side.
Pen Fix Sheet affixation specification
Affixes Pen Fix Sheet along Pen Fix Cushion
after Pen Fix Cushion is affixed
Pen Fix Sheet
Putting Pen Fix Sheet to
become a slope.
(It is not along the cushion shape)
The right and left
Cushion externals match
Length of tape over at both ends
Pen Fix Cushion is affixed by using
tools for LCD Rear WWAN.
Affixation load : More than
Pen Fix Cushion
LCD Rear WWAN
9.3.2.13. Assembly of the Pen Holde