Matsushita CF-T5LWETZ1 2 - Manual (Page 35)

35
9.3.2.8. Assembly of the Inverter and Putting Inverter Tapes
Safety Work Connection
ICD / Inverter Cable
The flaking off paper is peeled off
and then affixes on the connector.
pressurizes by the finger.
Safety Work
Safety Work
Safety Work
Safety Work
A two sided tape of the Inverter Case bottom is peeled off, and put.
Plinth externals
standard
Plinth externals standard
The damper is pressurized. Safety Work
The corner part of the
case is pressurized.
Inverter Case is arranged in the dotted line part.
Two sided 3 tapes of the back are peeled off before affixes
The damper is pressurized.