Matsushita CF-T5LWETZ1 2 - Manual (Page 33)

33
9.3.2.6. Assembly of the LCD Dumper
9.3.2.5. Assembly of the LCD Unit
LCD unit
LCD FRONT
TS
Lower and affix FRONT in parallel.
LCD resin frame
LCD resin frame
The other side bottom match
Do not go out to the back.
The edge of front externals is matched.
From externals
Sub-materials tape 30mm
Flaking off paper 3 place removal FRONT TP CUSHION E
LCD resin frame
LCD resin frame
The edge of the difference is matched.
The glass
edge side match
LCD DAMPER B is affixed so that there is no space
between FRAME and LCD FRONT’s .
(thing without the floatage. )
FRONT difference part standard FRONT difference part standard Paste side
Paste side
Bold Bold
It is thin.
It is thin.
The use of LCD DAMPER B is divided into the half and used.
LCD DAMPER B
LCD DAMPER B
LCD DAMPER A
LCD DAMPER B
LCD DAMPER B LCD DAMPER B LCD DAMPER B