Matsushita CF-T5LWETZ1 2 - Manual (Page 70)

70
HDD Cover
PET Tape
When HDD is stored,
the lid is put with the tape.
So as not to run aground
to the cushion the tape is put.
PET Tape
Edge of side
putting rubber
HDD Case WAN
Puts on the lid of the HDD
Case with the PET Tape.
HDD
SCREW (DFHE5025XA)
SCREW (DXQT2+E12FNL)
Laminate seal
The COA label matches and
puts externals of Bottom Sheet.
The lamination seal sets the direction
of Microsoft of polo gram character in
the direction of the character of the label.
COA Label
Bottom Sheet USA
Bottom Sheet USA1
Revision Label
Model Label
9.3.6.14. Assembly of the HDD / HDD Cover