Matsushita CF-T5LWETZ1 2 - Manual (Page 53)

53
9.3.3.9. Assembly of the W-LAN Sheet
SW Cable Sheet
Vertical direction
< preparation of W-LAN Sheet >
W-LAN Sheet
W-LAN Sheet
Sheet is lightly held by the finger and the fold
habit is applied.
Chip bottom match on Board
Horizontal direction
Silk line match on Board
Runs side
by side.
The cutting lack part is
inserted, and puts into
the state of the roll.
W-LAN Sheet is the sheet
metal externals and a
difference match.
The both sides tape flaking off
paper is peeled off and affixes.
Horizontal direction is a
suiting seat copper part
externals 0-1mm.
Silk is made a sign and affixes
CPU Cushion
HDD FPC
Bend completion chart
Mountain case
Mountain
case
Valley case
Valley case
Bends in the line of T mark.
9.3.3.10. Assembly of the HDD FPC