MRV Communications EM316SW-XY - Manual (Page 12)

Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
4
2.2 Modes of Operation
The EM316SW-XY supports four different operational modes.
1. Dual Repeater (Fiber and Copper)
2. Dual
Converter
3. Redundant Link
4. Switch (4-Port, mixed-media)
This section describes these modes and required DIP switch settings.
Select the operational mode with the DIP switches labeled MODE1 and MODE0, switches 5 and 6
on switch block 1 nearest the front panel of the module.
DIP Switches
Mode
MODE1 MODE0
Port Grouping
Dual Repeater ON ON
Fiber Repeater: ports P2 & P3
Copper Repeater: ports P1 & P4
Dual Converter ON OFF
Converter 1: ports P1 & P2
Converter 2: ports P3 & P4
Redundant Link OFF ON
Redundant: fiber optic ports P2 & P3
Local: copper port P1
Unused: copper port P4
Mixed-Media Switch OFF OFF All ports (P1, P2, P3, P4)