MRV Communications EM316SW-XY - Manual (Page 60)

Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
52
4.3.7.5 “show defaults”
Default settings are listed in the show defaults command output. These parameters
reflect the module boot configuration which is determined by DIP switches and firmware
programming. All lines in this display begin with “!” to indicate that they are comments for
information only.
fiberdriver(port/1.3.1)# show defaults
port 1.3.1
! auto-negotiation
! duplex full
! speed 100
! no shutdown
! description RJ-45 at 1.3.1
! rm-chassis 0
! rm-slot 0
! rm-port 0
! ! auto-neg-adv 0x0f:
! auto-neg-adv all
! mdi-pinout auto-sense
fiberdriver(port/1.3.1)#