MRV Communications EM316SW-XY - Manual (Page 42)

Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
34
4.3.3.10 Displaying and Saving System Parameters
Use the write terminal command to display the current operating parameters.
Use the write file command to save the current parameters to the configuration file.
fiberdriver# write terminal
Building configuration...
Current configuration:
!
! Configuration saved on 2005/01/02 00:29:12
!
!
! Configuration written by admin!
!
! EM316LNXNM-OT v4.0 fdr 58 (Jul 25 2007 - 09:34:25).
! U-Boot 1.0.1 (Jan 25 2005 - 11:08:25).
! Linux kernel v2.4.26 (#1 Wed Dec 13 10:36:44 PST 2006).
! EM316LNXNM (firmware 5c.13) (00:20:1a:02:48:28).
! Copyright (c) MRV Corp. 1993-2007.
!
ip interface 192.168.14.201/24
username admin password encrypted $1$kQ2rIq/$Ob8wFa2EW135XC4TnN7wJ/ class super
username admin group all
username debug password encrypted $1$NUIVuN/$sN7t87lmW5aoZG8ggT.I30 class debug
username debug group all
group all write 2
group all write 1
snmp-server community read encrypted $1$hZyZkA1$xiJTxyGDfVb1bcAYyW9Wi1
snmp-server community write encrypted $1$wZCHI9/$6H3mce5Y15iLhtdpoXBoa1
ip interface dhcp
chassis 1 type NC316BU-16 rev 1
chassis 2 type VIRTUAL16
slot 1.1 type EM316LNXNM-OT rev 4
slot 1.2 type EM316EFRM rev 6
slot 1.3 type EM316SW-XY rev 1
slot 1.4 type EM316F rev 12
slot 2.2 type EM316EFRM rev 6
fiberdriver#
fiberdriver(port/1.3.2)# write file
Building configuration file...
OK, saved to startup-config
fiberdriver(port/1.3.2)#