MRV Communications EM316SW-XY - Manual (Page 75)

Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
67
5 Appendix
5.1 Technical Specifications
Operating Temperature Range:
EM316SW-XY Æ 0° C to 50° C ( 32° F to 122° F)
EM316SW-XYTH
Æ
-35° C to 70° C (-31° F to 158° F)
Storage Temperature: -40° C to 95° C (-40° F to 203° F)
Physical Dimensions: 25 mm x 75 mm x 175 mm deep (1" x 3" x 7" deep)
Weight: 120 - 240 g (4.2 oz to 8.5 oz) depending on configuration
Power: Maximum 10W, dependent on SFP modules installed
5.2 Operating Environment
Temperature: 0 to 45 °C (32 to 113 °F)
Humidity: Non-condensing, less than 85%
Ventilation: 25 mm (1 inch) minimum clearance around external air vents
5.3 Troubleshooting
This section provides basic troubleshooting to rectify the most common issues with the EM316SW-
XY. If the information provided in this section and in this manual do not resolve the issue, please
do not hesitate to contact MRV Communications Customer Support or your local MRV sales
representative.
Basic Troubleshooting Checklist
• Ensure all chassis are powered and operating properly.
• Ensure all modules are inserted correctly and receiving power.
• Ensure SFPs are inserted properly and functioning correctly.
• Ensure User Links are functioning properly and sending the desired signal.
• Ensure Fiber Optic connections are correct (Rx to Tx).
• Ensure Dipswitches are set to the proper settings for your application.
• Ensure the speed, duplex, MDIX (or Auto-Negotiation) is set properly for all RJ-45 User Ports.