MRV Communications EM316SW-XY - Manual (Page 64)

Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
56
4.3.8.3 “mdi-pinout”
This command sets the mdi/mdix pinout for the target port.
4.3.8.4 “duplex”
This command sets the duplex mode on the target port.
4.3.8.5 “speed”
This command sets the data rates for the target port.
fiberdriver(port/1.3.1)# speed?
speed Adjust port speed
fiberdriver(port/1.3.1)# speed ?
10 Set to 10Mbps
100 Set to 100Mbps
fiberdriver(port/1.3.1)# speed 100
fiberdriver(port/1.3.1)#
fiberdriver(port/1.3.1)# duplex?
duplex Adjust port duplex setting
fiberdriver(port/1.3.1)# duplex ?
full Set to full duplex
half Set to half duplex
fiberdriver(port/1.3.1)# duplex full
fiberdriver(port/1.3.1)#
fiberdriver(port/1.3.1)# mdi-pinout?
mdi-pinout Adjust MDI/MDI-X auto-sense
fiberdriver(port/1.3.1)# mdi-pinout ?
auto-sense Autodetect MDI/MDI-X
mdix MDI-X
fiberdriver(port/1.3.1)# mdi-pinout auto-sense
fdrd[60]|CORE| warn|Jan 01 21:55:54 1.3.1: Auto-adjusted
PortAutoNegotiation -> off Ok
fdrd[60]|CORE| warn|Jan 01 21:55:54 1.3.1: Auto-adjusted
PortDuplex -> half Ok
fdrd[60]|CORE| warn|Jan 01 21:55:54 1.3.1: Auto-adjusted
PortSpeed -> 10 Mbps Ok
fiberdriver(port/1.3.1)#