MRV Communications EM316SW-XY - Manual (Page 29)

Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
21
3.3.3.3 Actuator/Button SFP Modules
The actuator/button SFP module has a button that you must push in order to remove the
SFP module from a switching module port.
Figure 19 – Actuator/Button SFP Module
3.3.3.4 Inserting an Actuator/Button SFP Module
To insert the actuator/button SFP module into a switching module port, line up the SFP
module with the port and slide it in until the actuator/button clicks into place. Be sure not to
press the actuator/button as you insert the SFP module because you might inadvertently
disengage the SFP module from the port.
Figure 20 -- Insertion of an Actuator/Button SFP Module
3.3.3.4.1 Removing an Actuator/Button SFP Module
Step 1 Gently press the actuator/button on the front of the SFP module until it clicks and the
latch mechanism activates, releasing the SFP module from the port.
Step 2 Grasp the actuator/button between your thumb and index finger and carefully pull
the SFP module from the port.
Figure 21 -- Removal of an Actuator/Button SFP Module