MRV Communications EM316SW-XY - Manual (Page 54)

Fiber Driver
®
EM316SW-XY
PN 1288003-001, Rev D2
46
The box below shows the output of the “?” typed alone on the command line in the port-level
configuration context. The box below is specific to the RJ-45 copper ports (P1 and P4) of the
EM316SW-XY modules.
The commands listed by the help (“?”) command may be different depending upon the
specific port context displayed.
fiberdriver(port/1.3.1)# ?
auto-neg-adv Adjust auto-negotiation advertisement
auto-negotiation Enable auto-negotiation
default Restore parameter(s) to defaults
description Set port name
duplex Adjust port duplex setting
echo Display text for scripting
end End current context and go down to initial command context
exit Exit current context and go down to previous context
list Print command list
logout Logout of the system
mdi-pinout Adjust MDI/MDI-X auto-sense
next Configure next element
no Negate a command
pager Pause scrolling when screen is full
port Configure a port
previous Configure previous element
protocol Set protocol
quit Exit current context and go down to previous context
rm-chassis Set remote chassis connectivity information
rm-port Set remote port connectivity information
rm-slot Set remote slot connectivity information
show Show basic info
shutdown Disable the port
sleep Pause CLI for scripting
speed Adjust port speed
up Configure parent element
who Find out who is connected to the system
whoami Who am I?
write Write running configuration to memory or terminal
fiberdriver(port/1.3.1)#