1 manually configuring the wireless units, Manually configuring the wireless units, Figure 44 - license key data entry – Motorola MotoWI4 PTP 600 Series User Manual
Page 103
Advertising
101
8.3.4.1
Manually Configuring The Wireless Units
If the installer / system administrator wishes, they may modify the default installation
configuration. If only the IP addresses (network configuration) are incorrect it is recommended
that the values are changed via the configuration menu (Section 6.3.1.2). If any other
parameters require modification then it is recommended that the system administrator use the
Installation Wizard.
A detailed description of the Installation Wizard follows:
The 600 Series bridge operational software requires a license key to enable the wireless
bridging capability and programs region code specific parameters in to the unit.
Figure 44 - License Key Data Entry
Advertising