7 connecting up, 1 preparing the pidu plus to odu cable, Connecting up – Motorola MotoWI4 PTP 600 Series User Manual

Page 56: Preparing the pidu plus to odu cable

Advertising
background image

54

The length of the safety lanyard must not exceed 1m (approx 3 ft) in length. The lanyard

should be made from a material that does not degrade in an outdoor environment.

The safety lanyard must be fixed to a separate fixing point that is not part of the direct

mounting system for the ODU.

7.7

Connecting Up

7.7.1

Preparing The PIDU Plus To ODU Cable

NOTE: The maximum cable length between the ODU and the user’s Network Equipment is

100m (330 ft). Cable lengths up to 300m (984 ft) can be used where the PIDU Plus to ODU

cable is supplying power only, i.e., when using the PTP 600 Series Bridge Optical Interface.

The cable should be assembled to the following instructions:

Step 1: Assemble gland on cable as shown

Step 2: Strip the outer insulation

Step 3: Arrange conductors as shown in

Figure 19 and cut to length

Step 4: Insert conductors and crimp

Advertising