4 raster considerations, 5 transmit power reduction at the band edges, 8ghz specific frequency planning considerations – Motorola MotoWI4 PTP 600 Series User Manual
Page 46: Raster considerations, Transmit power reduction at the band edges, Figure 15 - 5.8 ghz available spectrum settings
44
5.4.3
5.8GHz Specific Frequency Planning Considerations
Adjustment of the lower center frequency allows the operator to slide the available frequency
settings up and down the 5.8 GHz band. See Figure 15.
Figure 15 - 5.8 GHz Available Spectrum Settings
5.4.4 Raster
Considerations
The PTP 600 Series Bridge 5.8 GHz variant operates on a 10 MHz channel raster that is set
to even center frequencies. See Figure 15.
5.4.5
Transmit Power Reduction at the Band Edges
Operation at or near the 5.8 GHz band edges can results in a lower maximum transmit power.
In some configurations the PTP 600 Series Bridge solution reduces the power when
operating at the edge channels. The amount of reduction, if any, is dependant on the region
code of the region of operation. This currently only affects systems configured with Region
Code 1.