Motorola MotoWI4 PTP 600 Series - Manual (Page 114)

112
Once section 8.3.4.4 is complete pressing the “Disarm Installation Agent” button completes
the installation process 22 and the audible installation tone will be switched off. If the installer
wishes to modify the installation configuration then the ‘Back’ link can be used to access the
installation wizard steps described above.
After disarming the wireless link the user is presented with one of two possible configuration
pages, see Figure 53 and Figure 54. The screen presents hyperlinks to the main
configuration and spectrum management pages.
Figure 53 - Optional Post Disarm Configuration 1
Figure 54 - Optional Post Disarm Configuration 2
22
The installation process is completed when both ends of the link are ‘disarmed’.