Muratec F-320 - Manual (Page 108)

Changing the default settings
Setting Sleep mode (Energy saving mode)
Default setting: On
Note: All LED lamps on the control panel will not be off, even when the machine is
in the sleep mode.
If you want to change the Sleep mode to OFF, you can set it here.
1 Press MENU , 2, 1, 0, 5, ENTER . The LCD shows:
2 Press or until the mode you want appears.
3 Press ENTER to save the setting.
Setting the paper source
Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy
You can choose one of following for each paper source:
“Fax”: Select this if you want to use the paper source you selected for fax-
ing and list (or report) printing.
“Copy”: Select this if you want to use the paper source you selected for copy-
ing only.
“Fax/Copy”: Select this if you want to use the paper source you selected for fax-
ing, list (or report) printing and copying.
“Not Used”: Select this if you want to use the paper source you selected for sepa-
rator page (see page 3.21) or PC printing.
Note: PC printing is available only when your machine has the
optional printer controller kit.
1 Press MENU , 2, 1, 0, 8, ENTER . The LCD shows:
2 Press or until the mode you want appears.
3 Press ENTER to save the setting. The LCD shows:
4 Press or until the mode you want appears.
5 Press ENTER to save the setting.
Adjusting the machine’s clock
You can adjust the machine’s clock here.
1 Press MENU , 2, 1, 0, 7, ENTER . The LCD shows:
2 Use the numeric keypad to enter the current date and time to adjust the
clock.
3 Press ENTER to save the setting.
Setting 2-bin tray (Option)
Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray
You will set where the printed paper emerges in this operation.
Note: This operation will appear only if the optional 2-bin tray has been attached
to your machine.
1 Press MENU , 2, 1, 1, 0, ENTER . The LCD shows:
2 Press or until the mode you want appears.
If you chose On, proceed to step 3.
If you chose Off, skip to step 7.
3 Press ENTER . The LCD asks you to select Lower or Upper tray for copy exit.
Press or until the tray you want appears.
Copy Exit :Lower
$ $
/
# #
/Enter
2-Bin Tray :Off
$ $
/
# #
/Enter
Enter Time
01/27 ’02 14:30
Bypass Tray:Fax/Copy
$ $
/
# #
/Enter
Cassette1 :Fax/Copy
$ $
/
# #
/Enter
Sleep Mode :On
$ $
/
# #
/Enter
4.9