Muratec F-320 - Manual (Page 29)

1.18
Getting started
EasyStart software is already installed on your Muratec fax machine. It guides you
through the process of entering the following settings. These settings you make here
can always be changed later.
• Language on the LCD and Lists
• Current Day and Time
• Automatically Daylight saving time
• Fax reception mode
• Phone dialing type
• Subscriber ID (your fax phone number)
• Your TTI (your name)
• TTI select
• Time for the machine to enter the sleep mode
Getting started
Determine the following before you go any further:
1 The type of dialing your telephone system requires — Choose either Tone
or Pulse (rotary) dialing.
2 The name and fax number you want to appear on your faxes —
Every fax page you send arrives at the receiving machine with a single line of
text at the very top of the page. This text lists a name (called the Transmit
Terminal Identifier (
TTI )) and a fax number (called the Subscriber ID ).
The TTI cannot be longer than 22 characters.
Clearing stored settings
Before using EasyStart, clear your machine’s built-in user data memory. This
ensures the memory will hold only your settings.
Important: After you use EasyStart, do not clear the memory again unless an
authorized technician asks you to do so.
To clear the machine’s memory:
1 Press MENU , *, 0, 2. The LCD now asks if you want to clear the memory. The
following two displays will appear alternately:
Note: If you don’t want to clear the memory, just press CANCEL .
2 If you do want to clear the memory, press ENTER .
Entering initial settings
Important: If you press STOP during EasyStart, your fax machine returns to
standby mode (its normal condition). But it will keep the settings you
saved by pressing
ENTER as described in these instructions.
1 To start EasyStart software, press MENU , 9, ENTER . The LCD shows:
2 Press or until the language you want appears.
3 Press ENTER to save the language setting and continue EasyStart.
4 The LCD now shows the current calendar/clock setting, with a cursor appear-
ing on the first digit.
Enter Time
01/01 ’01 00:00
Language :English
$ $
/
# #
/Enter
Clear User Settings
No
→ →
Cancel
Clear User Settings
Yes
→ →
Enter
EasyStart (Initial settings)