Muratec F-320 - Manual (Page 67)

Advanced features
3.18
Storing fax documents with the Macro key
To store a fax document for either polling or F-Code polling using a Macro key:
1 Insert the document.
2 Press the Macro key that is programmed for the storing operation you want
to use.
3 Press ENTER , if you have not registered ENTER in the Macro key.
Erasing a Macro key
1 Press MACRO PROGRAM twice, ENTER . The LCD shows:
2 Press the Macro key ( M 1, M 2 or M 3) you want to erase.
3 Press ENTER . The following two displays will appear alternately:
Important: If you want to quit without erasing the Macro key you’ve
selected, press CANCEL . The machine will return to step 2.
4 Press ENTER to erase the job.
To erase another Macro key, repeat steps 2–4. Or press STOP to return to standby
mode.
Printing a list of your Macro keys
Your fax machine can print a list of the Macro keys.
The list includes:
(1) each key’s Macro key number
(2) the name of the job stored in the Macro key
To print a list of Macro keys, press MENU , 5, 1, 1, 6, ENTER .
Setting the speed for Macros
You can adjust the speed of one step in the Macro key.
1 Press MACRO PROGRAM three times, ENTER . The LCD shows:
2 Press or until the mode you want appears. The possible settings are:
3 Press ENTER to save the setting.
Macro Speed :Fast
$ $
/
# #
/Enter
Macro Speed :Slow
$ $
/
# #
/Enter
Macro Speed :Norm
$ $
/
# #
/Enter
Macro Speed :Norm
$ $
/
# #
/Enter
Erase Macro
No
→ →
Cancel
Erase Macro
Yes
→ →
Enter
Select Macro Key
M1:Activity journal