Muratec F-320 - Manual (Page 8)

These instructions are divided into the following sections.
• “Getting started” (page 1.1) describes how to set up your
machine, operating tips and some important settings that you
should perform before you use your machine.
• “Basic operations” (page 2.1) describes the basic operations of
the transmission, reception and copying.
• “Advanced features” (page 3.1) describes the convenient features
of your machine.
• “Changing the default settings” (page 4.1) describes how to
change the settings of your machine.
• Finally, “Just in case … ” (page 5.1) helps you if you ever have a
problem with your machine. It also tells you how to give your
machine the kind of easy, sensible care that should keep troubles to
a minimum.
Thanks for choosing Muratec.
Find your serial number and write it down
Please note that your machine’s serial
number is located on the bar code label
as shown on the drawing at right. Use
the blank at the bottom of this column
to copy this down before you set up
your machine.
Close up, the bar code label looks some-
thing like this, but with a different set of
numbers:
Please copy down your machine’s serial number below for future reference, and note
the machine’s model number:
My machine’s serial number: ________________________________________
My machine’s model number: Muratec F-320
Bar code label
Welcome to your Muratec fax machine!