MITSUBISHI ELECTRIC MELSERVO MR-J2S- A - Manual (Page 35)

1 - 16
1. FUNCTIONS AND CONFIGURATION
(3) For MR-J2S-700A
Front cover socket
(2 places)
A)
1)
Removal of the front cover Reinstallation of the front cover
1) Insert the two front cover hooks at the bottom into the
sockets of the servo amplifier.
2) Press the front cover against the servo amplifier until the
removing knob clicks. 1) Push the removing knob A) or B), and put you
finger into the front hole of the front cover.
2) Pull the front cover toward you.
A)
2)
B)
2)
1)
Front cover
hook
(2 places)