MITSUBISHI ELECTRIC MELSERVO MR-J2S- A - Manual (Page 282)

14 - 3
14. COMMUNICATION FUNCTIONS
14.2 Communication specifications
14.2.1 Communication overview
This servo amplifier is designed to send a reply on receipt of an instruction. The device which gives this
instruction (e.g. personal computer) is called a master station and the device which sends a reply in
response to the instruction (servo amplifier) is called a slave station. When fetching data successively, the
master station repeatedly commands the slave station to send data.
Item Description
Baudrate 9600/19200/38400/57600 asynchronous system
Transfer code
Start bit : 1 bit
Data bit : 8 bits
Parity bit : 1 bit (even)
Stop bit : 1 bit
Transfer protocol Character system, half-duplex communication system
1 frame (11bits)
Data
0 1 2 3 4 5 6 7
(LSB) (MSB)
Start Parity Stop
Next
start