Microsoft 2045 - Manual (Page 100)

Reception Features
88
5
Page Separation and Length
Reduction
When the size of a received message is
longer than the paper loaded in the
machine, each page of the message can
be split and printed on several sheets,
or reduced and printed on a single
sheet. For example, this function splits
the message if the message length is 20
mm (0.79") or longer than the paper
used. The message is reduced if it is
less than 20 mm (0.79"). When a mes-
sage is split, an asterix (*) is inserted at
the split position and about 10 mm
(0.39") of the split area is duplicated on
the top of the second sheet.
Note
❒ Your service representative can
customize this function with the
following settings:
• Reduction
• Print split mark
• Overprinting
• Overprinting length
• Guideline for split
❒ You can adjust the overprinting
and reduction lengths within the
following ranges:
• Overprinting length: 4 mm
(0.16"), 10 mm (0.39"), 15 mm
(0.59")
• Guideline for split: 5-155 mm (5
mm steps)/0.2"-6.1" (0.2" steps)
Reverse Order Printing
Normally, received pages are printed
and stacked on the tray in the order
they are received. If you turn this
function on, the machine will start
printing the message from the last
page received.
Note
❒ You can turn this function on or off
using Reception Setting. See p.132
“Reception Setting”.
❒ When this function is on, the first
page will be printed last.
❒ This function uses Memory Recep-
tion.