Microsoft 2045 - Manual (Page 28)

Checking and Canceling Transmission Files
16
2
Canceling a Transmission
You can cancel transmission of a file
when the file is being sent, stored in
memory, or fails to transmit. All the
scanned data is deleted from memory.
You can cancel a file for Memory
Transmission. This function is useful
to cancel a transmission when you no-
tice a mistake in destination or with
the originals after storing. To cancel
Memory Transmission, search for the
file to be canceled among the files
stored in memory, and then delete it.
Note
❒ If you cancel a transmission while
the file is being sent, some pages of
your file may have already been
sent and will be received at the
other end.
❒ If the transmission finishes while
you are carrying out this proce-
dure, transmission cannot be can-
celed.
AAAA
Press [Change/Stop TX File].
BBBB
Select the files whose transmis-
sion you want to cancel.
Note
❒ To display only the files being
sent, press [Files under TX].
❒ If multiple destinations were
specified, only the number of
unsent messages appears.
❒ If multiple destinations were
specified, only one destination
number appears. To display all
destinations, press [Check/Change
Settings]
.
CCCC
Press [Stop Transmission].
The selected file is deleted.
Note
❒ To quit transmission cancel,
press [Save].
❒ To cancel another transmission,
repeat from step B .
DDDD
Press [Exit].
The standby display appears.