Microsoft 2045 - Manual (Page 15)

3
1. Transmission Mode
Sending at a Specific Time (Send Later)
Using this function, you can instruct
the machine to delay transmission of
your fax message until a specified lat-
er time. This allows you to take ad-
v a n t a g e o f o f f - p e a k t e l e p h o n e
charges without having to be by the
machine at the time.
If you have a non-urgent fax, select
Send Later with Economy Transmis-
sion when you scan it. Faxes will be
queued in memory and sent during
Economy Transmission Time.
Important
❒ After the machine has been
switched off for about one hour, all
fax messages stored in memory are
lost. If messages are lost for this
reason, a Power Failure Report is
automatically printed when the
operation switch is turned on. Use
this report to identify lost messag-
es.
Limitation
❒ This function is unavailable with
Immediate Transmission. Use
Memory Transmission.
Note
❒ You can specify a time within 24
hours.
❒ If the current time shown is not
correct, change it. See the General
Settings Guide.
❒ For convenience, you can program
the time when your phone charges
become cheaper as the Economy
Transmission Time. See p.131
“Program Economy Time”.
❒ You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit steps
B and C.
AAAA
Place the original, and then select
the scan settings you require.
Reference
p.11 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.27 “Scan Settings”, Facsimile
Reference <Basic Features>
BBBB
Press [Transmission Mode].
CCCC
Select [Send Later].