Microsoft 2045 - Manual (Page 83)

More Transmission Functions
71
4
More Transmission Functions
If Memory Runs Out While
Storing an Original
If you run out of memory while stor-
ing an original (free space reaches
0%), the message “
Memory is full.
Cannot scan more. Transmission
will be stopped. ” is displayed.
Press [Exit] to transmit stored pages
only.
Note
❒ In default, scanned pages are sent.
To change the settings to delete
scanned pages, contact your serv-
ice representative.
Parallel Memory Transmission
This function dials while the original
is being scanned. Standard Memory
Transmission stores the original in
memory, then dials the destination.
Parallel Memory Transmission al-
l ow s y o u to q u ic k ly d et erm i n e
whether a connection was made. In
addition, this function scans the orig-
inal faster than Immediate Transmis-
sion. This is useful when you are in a
hurry and need to use the original for
another purpose.
Limitation
❒ Standard Memory Transmission is
used instead of Parallel Memory
Transmission in the following cas-
es:
• When the line is busy and could
not be connected to
• With Send Later
• When you store an original for
Memory Transmission while
another communication is in
progress
• When two or more destinations
are specified
• When you send only an Auto
Document
• When the first page of an origi-
nal is placed on the exposure
glass
• When you send messages
stored in the Document Server
Note
❒ You can turn this function on or off
with the User Parameters. See
p.147 “Changing the User Parame-
ters” (switch 07, bit 2).
❒ Standard Memory Transmission
may be used instead of Parallel
Memory Transmission depending
on the optional equipment in-
stalled if there is not enough free
memory left.
❒ If you use this function, the Memo-
ry Storage Report will not be print-
ed.
❒ If the {{{{Clear/Stop}}}} key is pressed,
an original will jam or memory
will run out during Parallel Mem-
ory Transmission stops. The Trans-
mission Result Report is printed
and files are deleted.
❒ When Parallel Memory Transmis-
sion is used, the total number of
originals in “Fax Header Print” is
not automatically printed.