Microsoft 2045 - Manual (Page 20)

Transmission Mode
8
1
DDDD
Depending on the Confidential
Transmission type, use one of the
following procedures:
Default ID
A Check that [Default ID] has been
selected, and then press [OK].
"Default ID" is shown above the
highlighted [Confidential TX].
Note
❒ To cancel Contidential
Transmission, press [Cancel].
The display returns to that of
step
C .
Override ID
A Press [ID Override].
B Enter the Confidential ID (4-dig-
it number) using the number
keys, and then press [OK].
"ID Override" and the entered
Confidential ID are shown
above the highlighted [Confiden-
tial TX]
.
Note
❒ If you make a mistake, press
[Clear] or the
{{{{Clear/Stop}}}} key
before pressing [OK], and
then try again.
❒ To cancel Confidential
Transmission, press [Cancel].
The display returns to that of
step
C .
EEEE
Press [OK].
Note
❒ To check the settings, press
[Transmission Mode] .
FFFF
Dial, and then press the
{{{{Start}}}}
key.
Note
❒ You can cancel the transmission
setup for Confidential Trans-
mission. See p.16 “Canceling a
Transmission”.