Microsoft 2045 - Manual (Page 97)

Printing Options
85
5
Reception Time
You can have the date and time print-
ed at the bottom of the message when
it is received. You can turn this func-
tion on or off using Reception Setting.
See p.132 “Reception Setting”.
Note
❒ When a received message is print-
ed on two or more sheets, the date
and time is printed on the last
page.
❒ The date and time when the mes-
sage was printed can also be re-
corded on the message. If you need
this function, contact your service
representative.
Two-Sided Printing
The optional duplex unit is required.
You can have a received message
printed on both sides of a sheet. You
can turn this function on or off using
Reception Setting. See p.132 “Recep-
tion Setting”.
Limitation
❒ To use this function, all pages of
the received document must be of
the same size—inform the sending
party of this beforehand if neces-
sary. You must also have paper set
in your machine of the same size as
that sent by the sending party. In
Two–Sided Printing, this machine
will correctly receive in A3
L, B4
JIS (Japanese Industrial Stand-
ard)
L, A4KL, B5 JISKL,
A5
KL(11"×17"L, 8 1 /
2
"
×14"L,
8 1 /
2
"
×11"KL, 8 1 /
2
"
×5 1 /
2
"
L). The
following table shows the results
that can be achieved when receiv-
ing with this machine.
❒ This function works only when all
pages are of the same width and
received into memory.
❒ This function cannot be used with
Combine two originals.