Microsoft 2045 - Manual (Page 70)

Other Transmission Features
58
4
Standard Message Stamp
Use this function to stamp a standard
message at the top of the first original
sent.
There are four types of standard mes-
sages: “Confidential”, “Urgent”,
“Please phone”, and “Copy to corres.
section”
You can also program other messag-
es.
Note
❒ While this function is in use, the
third line of the Label Insertion is
not printed. See p.70 “Program-
ming the Label Insertion”.
❒ When there is an image around the
area where the standard message
is to be stamped, that image is de-
leted.
❒ To program a standard message,
use the Program/Change/Delete
Standard Message function. See
p.137 “Programming, Changing,
and Deleting Standard Messages”.
AAAA
Place the originals, and the select
the scan settings you require.
Reference
p.11 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.27 “Scan Settings”, Facsimile
Reference <Basic Features>
BBBB
Press [Sub TX Mode].
CCCC
Select [Std. Message].
DDDD
Select the standard message to be
stamped, and then press [OK].
The selected standard message is
shown above the highlighted [Std.
Message]
.
Note
❒ To cancel the selection, press
[Cancel] . The display returns to
that of step C .
❒ Programmed standard messag-
es are shown in the keys.
❒ The machine cannot stamp mul-
tiple standard messages.
EEEE
Press [OK].
FFFF
Dial, and then press the
{{{{Start}}}}
key.