MITSUBISHI ELECTRIC G-50A - Manual (Page 15)

-13-
No. Name of switches
Current time
setting switch
Air direction
setting switch
Ventilation
Ventilation volume setting display
The operation mode of the interlocked
setting switch
Remote
operation
prohibit switch
Timer more
switch
Reset switch
Group select
switch
Back screen
switch
Cursor position
switch
*1: Room temperature can be displayed by selecting the room temperature display function per "5-7User
Setting".( but limited to indoor unit group)
These switches are used when the cur-
rent time is set.
The Air flow direction can be selected.
The air flow direction can be selected
to four directions and swing operation
(auto vane).
Refer to section "4-5 Current time setting" .
Air flow direction
Function Display
ventilation can be performed.
*Where there is no interlocked ventilation,
the operation of this switch is invalid.
*"Ventilation" is OA processing unit or LOSSNAY
Used to prohibit for the local remote
PROHIBIT : Local remote control specified on the
PERMIT : Local remote control is possible.
prohibit setting screen is not possible.
control.
The timer operation can be performed
according to a previously set operation
pattern.
The filter sign display reset is per-
formed.The reset processing is com-
pleted by pressing this switch two
times.
The display group is changed.
Use to back to the user menu screen.
The position of a cursor can be moved
when a cursor is appear.
The menu screen will be returned.
The cursor position (blinking) moves.
Group number display
This switch displays 1 50 group numbers.
The switch can also display group names.
Filter display
No display
Timer operation display
ON OFF
5
6
7
8
9
10
11
12
13
Filter