MITSUBISHI ELECTRIC G-50A - Manual (Page 35)

-33-
• A certain group name can be copied to another group.
• It is convenient to use a group name for other groups because a group name that was copied can also be cor-
rected.
Press the switch to display the original group on the group
name setting screen.
Press the switch to move the cursor to "M" .
Press the switch one time to record the setting name in memory.
"M" is displayed in reverse with blinking.
Recording the setting name to memory is completed.
Press the switch to select the copy destination group.
Press the switch to move the cursor "MR" .
Press the switch to read in memory.
Preformed the memory read for the group name.
Refer to section " (1) setting method (page 31)" and perform the cor-
rection of the group name.
( This method use the "M" (memory) and "MR" (memory read) functions.)
( 2 ) Group name copy
GROUP
SELECT
GROUP
SELECT
ENTER
ENTER
1
2
3
4
5
6
7
8