MITSUBISHI ELECTRIC G-50A - Manual (Page 33)

-31-
5 - 6 Group name setting
• Specify new group name.
• Either alphabet, numeric characters, hyphens or spaces can be used for name setting.
• Maximum of ten characters can be set.
are displayed.
The group configuration setting screen is displayed.
Press the switch to display the group number which will
be set in the group name setting.
Press the switch one time.
The group name setting screen is displayed.
The character " " is displayed in reverse.
Press the switch to move the cursor to the de-
sired character.
Press the switch.
The selected character is displayed in the group name display area.
Repeat operation or and set the group name.
When incorrect character is set, refer to section "Group name correc-
tion method (page 32)" .
Group name display area
• When the group name is displayed on the operation monitor screen, the first three characters of the group name
( 1 ) Setting method
Press the (or )switch to select"1. GROUP SETTING"
(or"4. GROUP SETTING") of the initial setting menu.
NEXT
1 4
GROUP
SELECT
ENTER
ENTER
1
2
3
4
5
6
6
7
7 8