MITSUBISHI ELECTRIC G-50A - Manual (Page 16)

-14-
(1) Local remote control operation prohibition setting.
• G-50A can prohibit the operation of item such as connected local remote controller or slave system controller
for each group. The prohibit items are ON/OFF operation, operation mode, temperature setting and filter sign
Press the switch to display the group that the operation
prohibition setting will be performed.
Press the or switch to set "PROH. (PROHIBIT)" on the
blinking display and press switch.
The prohibit setting screen is displayed.
Press the operation switch for the items to be prohibited.
• When the ON/OFF operation is to be prohibited
• When the operation mode is to be prohibited
• When the setting temperature is to be prohibited
• When the filter sign reset is to be prohibited
The items selected for prohibition are shown in reverse display.
After setting of prohibit item, press the switch to go back to the
operation setting screen.
The operation setting screen is displayed. Remote operation prohibition/permission display will
be change PERMIT to PROHIBIT and the pro-
hibited item set on the prohibit setting screen are
shown in reverse display.
The prohibit setting is completed.
• The system controller that performed the local remote control operation prohibition setting can
operate the prohibited items.
• When the No.4 function select is set ON, the prohibit setting of the local remote control operating
cannot be made. For details, refer to "5-3 Function setting."
NOTE:
Press the switch to set "PROHIBIT
ON " .
reset operation.
:
:
: or
:
0
REMOTE
PROHIBITION
1
ON/OFF
2
MODE
DEL.
RESET
4 7
GROUP
SELECT
BACK
SCREEN
ENTER
1
2
1
2
1
2
1
2