MITSUBISHI ELECTRIC G-50A - Manual (Page 34)

Simultaneously press the and keys on the initial setting menu
screen for 2 seconds to complete user operation.
When the group name setting is completed, press the switch.
The group configuration setting screen is displayed.
Repeat operation to and perform the group name setting for
each group.
When all the group name settings are complete, press the switch.
The initial setting menu screen is displayed.
When performing corrections to the group name, move the group name
cursor to the character to be correct.
Group name cursor movement method
Move the cursor to one of the group name cursor movement mark
using the switch.
Move the group name cursor to the character to deleted and press
the switch to delete the character.
• Deletion methods
• Insertion methods
Group name cursor
Group name cursor movement mark
Move the group name cursor to the location where character is to be
insert and press the switch to enter desired space.
To perform the setting, refer to section "5-6 User setting (page
Next refer to section " 4 User operation " and perform user operation.
34)".
NEXT
9 INS.
DEL.
BACK
SCREEN
BACK
SCREEN
3 9
9
10
11
12
-32-