MITSUBISHI ELECTRIC G-50A - Manual (Page 39)

-37-
6-2 Malfunction log monitor
• This function allows monitoring of a log of the last 64 malfunctions.
• The contents of malfunction and time the malfunction occurred is displayed. The contents of malfunction
is the address of the unit where it occurred, the error code and the address of the unit that detected the
malfunction.
• This data are remains in the memory even if supplied power is cut off.
• The malfunction log data can be deleted using the malfunction log reset operation. If the malfunction log data
is reset after the system is serviced, the log will provide a convenient record of the malfunction that have
occurred after that time when the system is next serviced.
Press the switch to select "4 MALFUNCTION MONITOR" on
the initial setting menu screen.
Changing pages on the malfunction log monitor screen.
Malfunction log reset operation
Press the switch to clear the malfunction log.
The malfunction log monitor screen is displayed.
Each time this switch is pressed, the current page
+1 is displayed.
Each time this switch is pressed, the current page
-1 is displayed.
( )
( )
,
,
NEXT
16-04-2002
05-04-2002
2002
2002
2002
4
GROUP
SELECT
1
2
3
DEL.
RESET
GROUP
SELECT