MITSUBISHI ELECTRIC G-50A - Manual (Page 20)

-18-
The collective operation setting initial screen is displayed.
Press the switch to set "REMOTE CONTROL PROHIBIT ".
Remote operation prohibition/permission display ("REMOTE CONTROL
PROHIBIT " ) is displayed with blinking.
Press the or switch to display the "SET" in blinking display
for the indicated function area.
Press the switch one time to complete the collective prohibit set-
ting.
The collective prohibit setting is executed.
It takes approximately 20 seconds.
The collective prohibit setting is completed when the remote operation
prohibition/permission display is change to be light.
• The display of setting contents is erased when shift to another screen.
• The following restrictions in the collective operation settings.
1. Temperature setting
The range that can be set falls within 19˚C 28˚C /67˚F 83˚F regardless of the operation mode.
2. Operation mode selection, fan speed selection, air direction, etc.,can be collectively set regardless
of the functions of the unit. However, actual setting to a unit without functions cannot be performed.
To obtain the correct setting contents, refer to the respective group operation setting screens.
NOTE:
ENTER
9
10
11
12
13
14
0
REMOTE
PROHIBITION