MITSUBISHI ELECTRIC G-50A - Manual (Page 19)

-17-
(2) Collective prohibit setting
Press the switch to set "PROH. (PROHIBIT)" in blinking
display and press the switch on the collective operation setting
initial screen.
The collective prohibit setting initial screen is displayed.
Select the items to be prohibited or permitted on the collective prohibit
setting initial screen.
Each time to press the switch corresponding to the prohibition item,
the prohibition or permission is selected.
Prohibition setting : The prohibited item is displayed in reverse with
Permission setting : The permitted item is displayed with blinking.
The selection method concerning to prohibit/ permit item is same as de-
scribed in section "4-2-1 (1) Local remote control operation prohibit
setting". ( page 14 )
The items selected for the prohibition or permission are displayed with
blinking.
And the "SET" is displayed with blinking in the function area.
When all setting are completed, press the switch one time to com-
plete this settings.
The collective prohibit setting is excused. The collective setting prohibition/permission item
setting is completed when the previous item light.
After setting of prohibit/permit items, press the
switch to back to the collective operation
setting initial screen.
The collective prohibit setting takes approximately
20 seconds.
blinking.
ENTER
ENTER
1
2
3
4
5
6 7
8
BACK
SCREEN