MITSUBISHI ELECTRIC LT-3280 - Manual (Page 116)

110
Appendix K: Changing the Color Temperature of the Display
Changing the Color Temperature
To change the color temperture of the display, do the
following:
1. If the TV is on, power it off by pressing Power on the
remote control. Then disconnect the display and the
media center power cords from the AC wall outlets.
Both power cords must be disconnected.
2. Disconnect the MontiorLink™ RS-232 Control
cable from the media center. It is not necessary to
disconnect the MonitorLink™ cable from the display.
3. Set the remote control to TV (see illustration to the
right). Re-connect the display power cord to the AC
wall outlet, then power On the display by pressing
Power on the remote control.
4. Press MENU on the remote control, then select Color
Temperature from the on-screen menu. Select the
color temperature setting you prefer (low, medium,
or high). See the Color Temperature Options table to
the right.
5. Power Off the display and disconnect the display
power cord from the AC wall outlet. Then set the
remote control back to CABLE/DBS/DTV (see
illustration to the right).
6. Connect the MonitorLink™ RS-232 Control cable to
the media center.
7. Connect the display and the media center power
cords to the AC wall outlets. Then, to power On both
the display and the media center, press Power on the
remote control.
The color temerature you selected will remain for all
images shown on the display until you re-set it by
following the above procedure.
NOTE: The default color temperature setting for the
LT-3280 and LT-3780 displays is “high.”
IMPORTANT
Be sure to follow the procedure
below exactly as stated, step by step.
Low Medium High
Whites appear
warm, more red
Whites are more neutral
Whites appear
cool, more blue
Best for a
room with low
incandescent
lighting Best for a room with
moderately bright
incandescent lighting
Best for a room
with bright
incandescent or
florescent lighting
Color Temperature Options
TV setting
CABLE/DBS/DTV setting