MITSUBISHI ELECTRIC LT-3280 - Manual (Page 68)

Chapter 4: IEEE 1394 Devices and NetCommand® Controlled Recordings
62
JPEG images cannot be edited through the
TV . To avoid file incompatibility problems,
temporarily move the JPEG images to your PC,
and change the name file names. MP3’s must
have at least 32 kHz sampling rate.
IMPORTANT
MediaCommand™ and Memory
Card Playback, continued
MP3 or WMA7 Audio Playlist Menu
Figure 18
1. Press GUIDE to display the Playlist menu.
2. Using ADJUST or to move the highlight to
different tracks (CH up/down will change pages of the
Playlist).
3. Press PLAY to begin playback. The Playlist menu will
be taken down. An asterisk (*) will be next to the song
currently playing.
Figure 18. Audio Playlist
For JPEG Pictures up to 128MB
1. Still images recorded on digital cameras using the
Exchangable Image File Format, version 2.1 (EXIF
2.1) standard for digital still cameras and Design
Rules for Camera File Systems version 1.0 (DCF 1.0).
Some images opened and resaved on a computer may
not playback or may not be able to display a picture in
the thumbnail list because the computer program that
opened and resaved the images changed the file to an
incompatible format.
2. Standard digital images with a maximum size of
5-megapixels for each image, or 2560 x 1920 pixels.
Pictures will be scaled to the display. Some pictures
may be cropped to fit.
3. Full path file names can be no longer than 50
characters and must end in a .jpg extension. Not all
50 characters will display.
For MP3 or WMA7 Audio files
1. Files recorded with sampling rates of 32 kHz, 44.1 kHz
or 48 kHz.
2. Files recorded with fixed bit rates
3. File names with .mp3 or .wma extensions
NOTE: During MP3 or WMA7 audio playback, audio
from the cards will be sent to the A/V receiver as
analog audio. Digital out is not available.
Media Setup Menu
Figure 19
Press DEVICE MENU at any time to display the Media
Setup screen, where you can adjust the Slideshow
Display, Frequency, Interval or Playlist Frequency.
Figure 19 . Media Setup Menu
For JPEG Picture Slideshow Setup
• For JPEG picture Slideshow playback, select
Automatic or Manual advance. For manual
operation, press PLAY or ENTER on the remote
control to advance each slide.
• For automatic advance, select the frequency or
number of times to show the complete slide show,
Once, Twice or Continuously.
• For automatic advance, select the interval time
each slide is shown, for example, 5 seconds, or 30
seconds.
For MP3 or WMA7 Audio Playlist Setup
• Select the frequency or number of times to
play the complete playlist. Once, Twice or
Continuously.
• To exit, press DEVICE MENU on the remote
control to re-display the memory card screen or
press HOME to return to TV viewing.