MITSUBISHI ELECTRIC LT-3280 - Manual (Page 20)

Chapter 1: Product Overview
14
#
"



Display Rear Panel
1. PC Video Input
Use this RGB video terminal to connect to the Video Out
terminal on a PC. This terminal supports VGA, SVGA,
XGA. and SXGA resolutions. See Chapter 6 for more
information.
2. PC Audio Input
Use this Stereo Mini jack to connect to the Audio Out
terminal on a PC (the Headphone terminal can be used).
3. AC Power Input
T o provide complete HDTV funtionality, the
display and media center must be connected
using both MonitorLink™ terminals [A] and [B]
.
Remove the covers shown in the lower diagram to
access the inputs described on this page.
A . MonitorLink™ RS-232C Control
Use the supplied RS-232C cable to connect the
RS-232C terminal on the display [A] to the RS-232C
terminal on the media center [A]. This input only supports
the media center.
B. MonitorLink™ A/V Input
Use the supplied A/V cable to connect the MonitorLink
A/V Input terminal on the display [B] to the MonitorLink
A/V Output terminal on the media center [B]. This input
only supports the media center.
Remove covers to access the
signal and AC power inputs.