MITSUBISHI ELECTRIC LT-3280 - Manual (Page 85)

Chapter 5: Using the TV Menu
79
Video Settings
◊ Contrast
Provides a slider to adjust the white-to-black level.
Low contrast shows a variety of shades in darker
images, while high contrast shows darker images
more uniformly black and makes colors appear
more vibrant. In most home lighting situations, a
medium contrast looks best. High contrast is good
for brightly lit environments.
◊ Brightness
Provides a slider to adjust the overall brightness of
the picture .
◊ Sharpness
Provides a slider to adjust the detail and clarity.
◊ Color
Provides a slider to adjust the color intensity.
◊ Tint
Provides a slider to adjust the proportion of red to
green.
◊ Video Noise
Use to reduce minor noise (graininess) in the
broadcast received on Ant-1 and Ant-2, Inputs 1
and 2, and Component 1 and 2. Use standard with
good quality signals.
◊ Film Mode (Auto) - On or Off
On is the automatic setting and will automatically
detect and apply film decoding correction for
signals that originated on 24 frames per second film
cameras and then were converted for broadcast to
30 frames per second video.
When the original signals originated on 30 frames
per second video cameras, the On setting will
automatically apply video decoding, the same as
used with the Off setting. Try the Off setting when
the TV seems to have difficulties and adds too many
jagged edges to the images.
Film Mode is not effective for progressive scan
(480p) devices, and high definition signals.
◊ Backlight
Use to manually adjust the contrast of the PC screen
image.
NOTE: A slider will display on-screen for most settings.
When the slider is displayed it has a numeric value,
where 63 is the maximum, 31 is the mid-point and 0 is
the minimum.
NOTE: For PC video settings, see Chapter 6.
A/V Setting Descriptions: Video
Using the VIDEO Button on the Remote Control
To adjust individual Video settings directly with the
remote control:
1. Press VIDEO to cycle through the available settings.
2. Press ADJUST or to adjust the setting. After 5
seconds of inactivity, the setting display will disappear.