V- chip lock menu, V- chip menu, Setting a pass code – MITSUBISHI ELECTRIC LT-3280 User Manual

Page 81: V-chip lock menu overview

Advertising
background image

Chapter 5: Using the TV Menu

75

V- Chip Lock Menu

V-Chip Lock Menu Overview

Figure 20

The V-Chip Lock menu gives you access to V–Chip
options and to non-V-Chip TV-locking options as well.
You must use a pass code to open this menu to enable/
disable the lock options. The two different types of locks
available are:

V-Chip
Lets you restrict access to programming based on
program-rating signals sent by the broadcaster. You
can also set the time of day for these restrictions to
be in effect.

Lock by Time
Lets you restrict all TV viewing by time of day.

Figure 20. V-Chip Lock Menu

V-Chip Icon

Lock TV by

Time

Setting a Pass Code

You are prompted to enter a pass code whenever you
select V-Chip Lock on the menu or press the V-CHIP key
on the remote control. To set a pass code for the first
time:

1. Do one of the following:

Press V-CHIP on the remote control.

Press TV MENU, highlight V-Chip Lock, then
press ENTER.

The V-chip Parent Lock screen in Figure 21 displays.

2. Input a four-digit pass code using the number keys

on the remote control.

Press CANCEL to delete a number and move
back one space.

Press MENU or HOME to exit without setting
a pass code.

3. Press ENTER to confirm the pass code just input.

To reset the pass code, see the procedure in Appendix C.

V-CHIP PARENT LOCK

To go to the menu, enter a new passcode.

– – – –

Use the NUMBER buttons and press ENTER.

Figure 21. The V-Chip Parent Lock screen

V- Chip Menu

Figure 22

The V-Chip menu allows you to:

Turn the V-Chip Lock on or off

Change the permitted V-Chip rating level

Set the time of day to enforce rating restrictions

The TV comes from the factory with pre-set V-Chip
ratings and with the V-Chip Lock turned off. The preset
ratings are TV-PG (TV rating) and PG (movie rating). If
you turn on the V-Chip, these presets will allow only
programs rated TV-PG/PG or lower. You can turn on
V-Chip from this menu or by using the V-CHIP button on
the remote control. Use the V-Chip menu to change the
permitted rating levels.

After changing channels or devices, there may be a delay
of up to five seconds before the V-Chip lock takes effect.

Figure 22. V-Chip Menu

IMPORTANT

If you forget your four-digit pass code,
see Appendix C.

Advertising
This manual is related to the following products: