IBM 19 - Manual (Page 108)

and the QMS Crown Technical Reference (optional manuals
available from your QMS vendor) for information on these
commands.
Controlling the Printer with the Control Panel
Another way to control the printer is through the Configuration
menu, which you access through the printer’s control panel. The
printer is configured at the factory for the most typical printing
environments, so most users don’t have to enter the Configuration
menu often. However, there are a few situations that may require
you to use the control panel:
■ To configure the printer for printing on a different media
type (for example, transparency instead of paper).
■ To configure features not configurable through your
application.
NOTE: For information on restoring the factory default settings
in the Co nf i gur a t i o n men u, s e e t he
“Administration/Miscellaneous/Restore Defaults”
section later in this chapter.
Configuration Method Priorities
Options or values selected through an application or driver receive
highest priority and override all other options or values. Those
selected through PS Executive Series Utilities have second priority.
Those selected through DOCs (Document Option Commands)
have third priority, and those selected through the control panel
have the lowest priority.
Chapter 4
4 - 2 P r i n t e r C o n f i g u r a t i o n
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500